Hitachi HF-W6500 45/40 Feature Manual page 39

3. SETTING UP THE RAS FEATURE
NOTE
• If this equipment continues to operate while fan failure is detected, internal
parts such as a processor are not cooled down sufficiently, and that may
cause thermal runaway of the system due to malfunction of the equipment or
result in damage to the parts. Because of this, if you clear the "Automatically
shutdown if fan failure has been detected" check box, the following
cautionary message is displayed. Enable this function (select the check box)
whenever you can.
If you click Cancel when you receive the message above, the check box
reverts back to being selected. If you click OK, the check box is cleared.
• After an automatic shutdown initiated by this function is complete, the power
is turned off.
• The remote shutdown input is polled every 5 seconds. That means it may
take up to 5 seconds from when a remote shutdown is requested to when an
actual shutdown process starts.
3-4