Table of Contents
Advertisement
5. RAID status [D Model only]
The RAID status is displayed.
Table 4-5 RAID Status and Displayed Information
RAID status
No.
Detailed
information
1
Normal
-
2
3
-
4
5
Degraded
Rebuild
6
7
Fail
-
8
Unknown -
6. OFFLINE button [D Model only]
Click this button to disconnect the corresponding drive from the RAID.
This button works only when the drive condition of a drive in the RAID is either
"Normal", "Failure anticipation by SMART", or "Drive usage excess".
In order to disconnect a drive, you must have administrator privileges. Log on to the
computer using an administrator account and click OFFLINE.
If you click OFFLINE, a confirmation message similar to the one shown in Figure 4-
6 will be displayed. To disconnect the drive from the RAID and set the drive to
offline, click Yes. If you click No, the drive will not be disconnected.
Figure 4-6 Confirmation Message when Disconnecting the Drive in Drive Bay1
Displayed information
[Optimal]
[Optimal (Media Error)]
[Degrade]
[Degrade (Media Error)]
[Degrade (Rebuild: xx%)]
[Degrade (Rebuild: xx%,
Media Error)]
[Fail]
[Unknown]
4-9
4. CHECKING THE HARDWARE STATUS
Note
Media error occurs.
xx: Progress of the rebuild
process
xx: Progress of the rebuild
process
Media error occurs.
The system has stopped. This
message may not be displayed.
Advertisement
Table of Contents
