Using Pre-Ground Coffee - Philips HD7751 Manual

Hide thumbs Also See for HD7751:
Table of Contents

Advertisement

4 Remove the coffee bean container lid (1) and fill the container with coffee beans (2). Make sure that
there are enough coffee beans in the container for the amount of coffee you want to brew (Fig. 9).
Note: Always make sure the bean container is at least half full.
Warning: The maximum capacity of the coffee bean container is 250g. To prevent the
grinder from jamming, do not exceed this amount.
Warning: To prevent the grinder from jamming, do not use unroasted or caramelized
beans. Use coffee beans instead of espresso beans, as espresso beans may damage
the grinder.
5 Turn the grind selection knob to select the desired type of grind (from fine to coarse). There are
nine grind settings (Fig. 10).
Tip: We advise you to experiment with the different grind settings to find out which setting you
prefer.
6 To select the number of cups, press the cups button as many times as the desired number of cups
(Fig. 11).
-
The cups button lights up briefly and the appliance beeps. The selected number of cups
appears on the display.
Note: Make sure that the number of cups you select with the cups button is consistent with the
amount of water in the water reservoir. Please keep in mind that the coffeemaker uses all the water
in the water reservoir. If you select a number of cups that is smaller than the amount of water, the
coffee becomes weaker than you intended.
7 Press the strength button once or several times until the desired coffee strength is selected (mild,
medium or strong (Fig. 12)).
-
When you press the strength button, it lights up briefly and the appliance beeps. The display
shows the selected coffee strength.
8 Press the start/standby button (Fig. 2).
-
The appliance beeps and the display lights up.
9 Press the start/standby button again to start the brewing process (Fig. 2).
Warning: Keep away from the steam vent during brewing, as hot steam escapes
through the vent.
-
The grinder grinds the required amount of coffee beans.
-
The freshness indicator (cup symbol) flashes rapidly on the display until the brewing process is
finished (Fig. 13).
-
The coffeemaker beeps 5 times when the brewing process is finished.
10 Wait until the coffeemaker has stopped beeping before you remove the glass jug.
Note: After brewing, coffee drips from the filter basket for several seconds.
-
The freshness indicator (cup symbol) flashes slowly on the display for 120 minutes after brewing,
to indicate that the coffee is fresh (Fig. 13).

Using pre-ground coffee

If you want to use pre-ground coffee instead of coffee beans, follow the steps below.
1 Press the open button on the right-hand side of the coffeemaker to open the filter basket holder
(Fig. 7).
2 Place a paper filter (no. 4) or the permanent filter in the filter basket to collect the ground coffee
(Fig. 8).
3 Close the filter basket holder.
English
9

Advertisement

Table of Contents
loading

Table of Contents