Setting Up A Home And Office Network; Connecting To A Network Adapter - Dell Dimension 1100 Owner's Manual

4 Turn on the printer and then turn on the computer. If the Add New Hardware Wizard window
appears, click Cancel.
5 Install the printer driver if necessary. See the documentation that came with your printer.

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTE:
Plug the network cable into the network adapter connector on the computer. Do not plug the network cable
into the modem connector on the computer. Do not plug a network cable into a telephone wall jack.
1 Connect the network cable to the network adapter connector on the back of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
2 Connect the other end of the network cable to a network device.
parallel connector on computer
screws (2)
notches (2)
parallel printer cable
connector on printer
clips (2)
Setting Up and Using Your Computer
11