Husqvarna AUTOMOWER 520 Operator's Manual page 50

Symptoms Cause
The product is The product is parked due to a sched-
parked for hours in ule setting, or because
ther notice has been chosen in the app.
the charging sta-
tion.
The product does not operate if the bat-
tery temperature is too high or too low.
The product often Spiral cutting is a natural part of the
moves in circles or product's movement patter.
spirals.
The product turns This is completely normal for the prod-
round and stays uct. The product have GPS assisted
on a small area for navigation that contributes to an even
several minutes. result.
50 - Troubleshooting
Action
Open the app and edit the schedule
Park until fur-
settings, or go to
the product.
The product starts to operate again
when the temperature is between the
set limits and the schedule settings let
the product to operate. Make sure that
the charging station is put in an area
with protection from the sun.
Adjust the intensity of spiral cutting.
This function can be disabled if neces-
sary. Refer to
26 .
No action.
Dashboard and start
Spiral cutting on page
1439 - 002 -