Samsung DVM S AM MXVAFC Series Installation Manual page 24

Preparing for installation
Moving the outdoor unit
Select the moving path in advance.
Be sure that moving path can support weight of the outdoor unit.
Do not slant the product more than 30˚ when carrying it. (Do not lay the product down in sideways.)
Surface of the heat exchanger is sharp. Be careful not to get injured while moving the product.
You must use certain part of the product when moving the product.
CAUTION
When moving with a crane
Fasten the wire rope as shown in the figure.
To protect damage or scratches, insert a piece of cloth between the
outdoor unit and the wire rope.
When moving with a forklift
Carefully insert the forklift forks into the forklift holes at the bottom of
the outdoor unit.
Be careful with the forklift from damaging the product.
When moving the product without wooden pallet and the crane is not available for use
Connect a wire rope to the outdoor unit as you would move it with a
crane.
Hang the wire rope to the forklift fork to move the outdoor unit.
24
Wire rope
Holes for wire rope to go
through
Forklift
Holes for forklift forks
to go through
Forklift
Forklift holes
Wire rope