Maintenance - ohmex HET 1919 G Instruction Manual

EN
• Insert Plug Into Mains Socket.
Make sure that the supply voltage corresponds with the data
indicated on the appliance nameplate.
• Open the door (3) to access the control panel:
- "0/I" Switch (ON/OFF) (6)
- Press the button once to turn the appliance and the fire effect on.
- Press the button a second time to turn the appliance and the fire effect off.
- "Resistor I" button (7)
- Press the button once to set the minimum heat function (900W).
- Press the button a second time to stop the function.
- "Resistor" button (7) + "Resistor" button (8)
- Press the buttons (7 + 8) to set the maximum heat function (1800W).
- Press the buttons a second time to stop the function.
- Thermostat knob (4)
- Rotate thermostat control (4) clockwise or counter-clockwise to achieve de-
sired room temperature.
- Flame dimmer knob (5)
- Increase or decrease the flame effect by rotating the flame adjustment switch
(5).
- To completely turn the appliance off press the switch (6) on "0" (OFF).
Before performing maintenance operations,
ALWAYS disconnect the plug from the mains
power and wait for the appliance to be
completely cooled.
52
USE

MAINTENANCE

HET 1919 G