Technical Data - ohmex HET 1919 G Instruction Manual

EN
- Power supply: ................................. 220-240V~ 50Hz
- Power: ................................................ 1800W
- Fan ON/OFF switch
- Flame effect ON/OFF switch
- Dual heat setting 900W + 900W
- Adjustable thermostat
- Adjustable flame effect intensity
- Automatic shut-off in case of overheating
- Dimensions (wxdxh): 390 x 260 x 548 mm
The heater is designed to be free standing on a hard level surface. When positioning,
please bear the following points in mind:
• If you are placing the heater in an alcove, make sure that 150mm side clearance is
maintained to ensure good air circulation
• The heater must not be located over a fixed electrical socket.
• The socket must always be accessible in order to disconnect the heater from the
electrical supply for maintenance or when replacing a lamp.
• Keep hearth rugs and other soft furnishings, etc., away from the front of the heater. They
could obstruct the free flow of hot air from the fan and damage both soft furnishings
and heater.
150 mm
50

TECHNICAL DATA

PLACEMENT
HET 1919 G
150 mm
controls