Table of Contents
Advertisement
Available languages
Available languages
HET 4530 COLOR
CLEANING AND MAINTENANCE
Before performing cleaning operations,
ALWAYS disconnect the plug from the mains
power and wait for the appliance to be
completely cooled.
- Use a delicate detergent for the general cleaning.
- Clean the ventilation holes with a cloth or with a feather duster.
- Never use abrasive detergents or materials or "aggressive" cleansers.
- The glass (2) must be cleaned carefully using a moistened soft cloth.
- DO NOT use glass cleaners.
NEVER immerse the appliance in water or in other liquids.
The appliance doesn't use a standard lamp for the flame effect; it uses an electronically
controlled LED system to create the effect. For this reason, there are no parts which can
be replaced or repaired by the user.
In case of need, please refer to a qualified electrician.
INCONVENIENCES AND POSSIBLE SOLUTIONS
Problem
The appliance doesn't turn on
The flame effect doesn't turn on
Possible solution
Check the fuse conditions.
If it is necessary, replace it with another
one with the same characteristics.
The appliance overheated (cut-off
protection).
Wait at least 15 minutes, then try to turn it
back on.
Defective Led light.
Have the appliance checked by a qualified
electrician.
EN
113
Advertisement
Table of Contents
