Cleaning And Maintenance - ohmex HET 4530 FIRE Instruction Manual

EN
Cut-Off safety
- The appliance is equipped with a safety switch which activates if the appliance itself
overheats (example: blocked ventilation slots, etc.).
- For safety reasons, the appliance DOESN'T automatically turn back on once it has
cooled down
- To restore the appliance, disconnect the plug from the socket for at least 15 minutes.
- Reconnect the plug from the power socket.
- Turn the appliance on by pressing the switch (6) on "I" (ON); the appliance emits a "beep"
indicating that it's electrically powered.

CLEANING AND MAINTENANCE

Before performing cleaning operations,
ALWAYS disconnect the plug from the mains
power and wait for the appliance to be
completely cooled.
- Use a delicate detergent for the general cleaning.
- Clean the ventilation holes with a cloth or with a feather duster.
- Never use abrasive detergents or materials or "aggressive" cleansers.
- The glass (2) must be cleaned carefully using a moistened soft cloth.
- DO NOT use glass cleaners.
NEVER immerse the appliance in water or in other liquids.
The appliance doesn't use a standard lamp for the flame effect; it uses an electronically
controlled LED system to create the effect. For this reason, there are no parts which can
be replaced or repaired by the user.
In case of need, please refer to a qualified electrician.
94
USE
HET 4530 FIRE