Table of Contents
Advertisement
Map (PTC-CTV Mode)/CPU channel lineup (CPU-CTV Mode)
is locked, and user access to channel settings in the TV setup
menus is restricted.
Note: This item is not applicable when the TV is in FTG Mode.
029 - REMAP AUX INPUTS
Set to 1 to remap the PTC's direct tune channels for Aux inputs
from 13x to 9x. This allows 2-digit only tuning systems (i.e.,
legacy On Command Video™) to direct tune Aux inputs. See also
Reference section, "TV Aux Input Configuration."
030 - ACK MASK
MPI Communication Parameter. When set to 1, enables the ACK
feature of MPI.
031 - POLL RATE
MPI Communication Parameter. Selects the poll rate for MPI. Step
size of 16 ms. Changing from default may affect communication via
MPI.
032 - TIMING PULSE
MPI Communication Parameter. Sets the baud rate for MPI. Step
size of 4.3 uS. Changing from default may affect communication
via MPI.
035 - HDMI1 ENABLE
Set to 1 to enable HDMI 1 input in DTV Mode. Set to 2 to enable
HDMI 1 input in PC Mode. Set to 0 to disable display panel HDMI
1 input.
Note: This setting is ignored if item 093 RJP AVAILABLE is set to 1.
039 - REAR AUX EN. (Rear Aux Enable)
Set to 1 to enable display panel rear Aux (AV) input. Set to 0 to
disable display panel rear Aux (AV) input.
041 - SIMPLINK EN
Set to 0 to disable the SIMPLINK feature. Set to 1 to enable
SIMPLINK functionality without enabling remote control access
to the SIMPLINK Menu. Set to 2 to enable both SIMPLINK
functionality and SIMPLINK Menu access, though note that the
Speaker menu option will be inaccessible/grayed out. Set to 3 to
enable all aspects of SIMPLINK feature and SIMPLINK Menu. If
a home theater device is connected to the TV, users can select
either the TV or HT (home theater) speaker.
Note: When both this item and item 042 AUTO INPUTS are
enabled in the Installer Menu, HDMI inputs will be detected by
SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
042 - AUTO INPUTS
Determines the Aux inputs for which auto-sensing is enabled. Set
to 0 to disable auto-sensing for all available inputs. Set to 255 to
enable auto-sensing for all available inputs. For information on
options for individual input settings, see Reference section, "Auto
Input(s) Sensing Feature."
206-4340
Installer Menu (Cont.)
Note: In order for auto-sensing to be enabled for an input, that
input must also be enabled in the Installer Menu. For example, to
enable auto-sensing for HDMI 1, item 035 HDMI1 ENABLE must
also be set to 1 or 2. Also, see note above regarding TV operation
when both this item and item 041 SIMPLINK EN are enabled.
Note: When this item is enabled in the Installer Menu, item 093
RJP AVAILABLE is automatically set to 0.
046 - STRT AUX SRCE (Start Aux Source)
Sets the starting Aux source. When turned ON, the TV will tune to
starting Aux source if item 004 STRT CHANNEL is set to 0.
1 = AV
3 = HDMI 1
7 = HDMI 3
255 = Last Aux
Note: In order for an Aux input to be selected as the starting Aux
source, the input also must be enabled in the Installer Menu.
Note: This item is not available in the Installer Menu unless item
004 STRT CHANNEL is set to 0.
047 - AUX STATUS
Controls the MPI status channel response for Aux sources. Set to
1 for the Aux source to be reported as its channel number. Set to
0 for the Aux source to be reported as channel 0. See Reference
section, "TV Aux Input Configuration," for Direct Access channel
numbers.
053 - DIS. CH-TIME (Disable Channel-Time Display)
Set to 1 to disable the TV's native Channel-Time display when a
custom channel label/channel information will be provided by the
MPI command. Set to 0 to enable the TV's native Channel-Time
display.
069 - EN. CH-T COL. (Enable Display Characters Custom Color)
Set to 1 to enable custom color for MPI display characters. Set to
0 to disable custom color for MPI display characters.
070 - FOR. CH-TIME (Display Characters Foreground Color)
Set the foreground color for MPI display characters according to
the following color chart:
0 = Black
2 = Green
1 = Blue
3 = Cyan
If the foreground and background colors for the display characters
are the same, the background will be transparent.
Note: This item and item 071 BCK. CH-TIME also apply to the
"Channel Not Available" message if item 073 CH NOT AVBLE is
set to 1 (enabled).
Note: Items 070 FOR. CH-TIME and 071 BCK. CH-TIME are only
available in the Installer Menu when item 069 EN. CH-T COL. is
set to 1.
071 - BCK. CH-TIME (Display Characters Background Color)
See description for item 070 FOR. CH-TIME above. The color
chart is the same for both items.
5 = HDMI 2
4 = Red
6 = Yellow
5 = Violet
7 = White
31
Advertisement
Table of Contents
Troubleshooting
