LG 32LT570H Commercial Mode Setup Manual page 27

Installer Menu Items 000 through 071
Item Function
000 INSTALLER SEQ
001 POWER MANAGE
002 AC ON
003 BAND/AFC
004 STRT CHANNEL
005 CHAN LOCK
007 STRT VOLUME
008 MIN VOLUME
009 MAX VOLUME
010 MUTE DISABLE
015 SLEEP TIMER
016 EN. TIMER
017 ALARM
020 FEATURE LEVEL
021 V-CHIP
022 MAX BLK HRS
023 CAPTION LOCK
028 CH. OVERIDE
029 REMAP AUX INPS
030 ACK MASK
031 POLL RATE
032 TIMING PULSE
035 HDMI1 ENABLE
039 REAR AUX EN.
041 SIMPLINK EN
042 AUTO INPUTS
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
206-4340
Value Range Default Value
0 – 3 0
0 – 7 0
0 – 3, 16 – 19 0
0 – 3 1
0 – 127, 255 255
0 / 1 0
0 – 63, 255 255
0 – 63 0
0 – 63 63
0 / 1 0
0 / 1 1
0 / 1 0
0 / 1 1
0, 16 – 24 0
0 / 1 1
0 – 99 12
0 / 1 0
0 / 1 1
0 / 1 0
0 / 1 0
20 – 169 94
186 – 227 207
0 – 2 1
0 / 1 1
0 – 3 0
0 – 255 0
1, 3, 5, 7, 255 7
0 / 1 0
0 / 1 0
0 / 1 1
0 – 7 2
0 – 7 2
Brief Description of Function
Leave default set to 0.
Selects the number of hours of inactivity allowed before the TV automatically
turns itself OFF. Set to 0 to disable Power Management.
Determines the status of the TV (ON, Instant ON enabled, etc.) when AC power
is applied. See detailed descriptions.
Selects the RF Tuning Band: 0=Broadcast, 1=Cable, 2=HRC, 3=IRC
Channel tuned when the TV is turned ON. (Set to 255 to tune to channel
tuned before the TV was turned OFF.)
If set to 1, cannot tune from current channel.
Volume level when the TV is turned ON. (Set to 255 to use volume level set
before the TV was turned OFF.)
Sets the minimum allowable volume setting.
Sets the maximum allowable volume setting.
Set to 1 to disable the Mute function.
Set to 1 to enable the Sleep Timer feature.
Set to 1 to enable On/Off timers.
Set to 1 to enable the Alarm feature in the Function Menu.
Determines an additional IR code scheme to which the TV will respond.
Set to 1 to enable V-Chip (Parental Control) functions.
Determines the maximum number of Parental Control blocking hours that can
be set in the Function Menu.
Set to 1 to retain the caption setting selected before the TV was turned OFF.
If set to 0, users can only tune to channels that are included in the PTC
Channel Map. See detailed descriptions.
Set to 1 to remap the PTC's direct tune channels for Aux inputs from 13x to 9x.
If set to 1, enables the ACK feature of MPI.
Selects the poll rate for MPI.
Sets the baud rate for MPI.
Set to 0 to disable HDMI 1. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 1.
Set to 1 to enable the display panel AV input jack.
Determines the status of the SIMPLINK feature. See detailed descriptions.
Determines the Aux inputs for which auto-sensing is enabled. See detailed
Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
Controls the MPI status channel response for Aux sources. Set to 1 for Aux
source to be reported as its channel number.
Set to 1 to disable the TV's native Channel-Time display.
Set to 1 to enable custom color for MPI display characters.
Chooses custom foreground color for MPI display characters.
Chooses custom background color for MPI display characters.
Installer Menu (Cont.)
descriptions.
27