LG 32LT570H Commercial Mode Setup Manual page 28

Installer Menu (Cont.)
Installer Menu Items 073 through 122
Item Function
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
088 EN NOISE MUTE
090 KEY LOCK
091 HDMI2 ENABLE
092 HDMI3 ENABLE
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
097 AUDIO OUTPUT
098 PRO:CENTRIC
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
107 BANNER SELECT
116 VIDEO MUTE EN
117 FACT DEFAULT
118 POWER SAVINGS
119 DATA CHANNEL
121 UPDATE TIME HR
122 UPDATE TIME MN
28
Value Range Default Value
0 / 1 0
0 / 1 0
0 – 255 0
0 – 255 0
0 – 255 0
0 – 255 0
0 / 1 1
0 – 5 5
0 / 1 0
0 / 1 1
0 / 1 0
0 – 2 1
0 – 2 1
0, 1, 2, 5, 6 0
0 / 1 1
0 – 4 2
0 – 9 7
0 / 2 0
1 – 202, 255 255
0 – 4 4
0 / 1 1
0 – 255 0
0 / 1 0
0 / 1 1
0 / 1 0
0 / 1 0
1, 3, 7 3
0 – 135, 253,
255
255
0 – 23, 128, 255 128
0 – 59 0
Brief Description of Function
If set to 1 and item 028 CH. OVERIDE is set to 0, a "CHANNEL NOT
AVAILABLE" message is displayed if the user attempts to direct tune a channel
that is not included in the channel lineup.
If set to 1 and loss of MPI communication occurs, the TV tunes to the
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-controlled systems.
Set to 1 to remove the blocking hours setting in the Function Menu for Parental
Control and make the block permanent.
(Analog channels only) If set to 1, audio is muted if no signal is present.
If set to 1, all display panel button functions are locked. IR is still functional.
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
Set to 0 to disable HDMI 3. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 3.
Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. See
Set to 1 to enable the SAP feature in the Function Menu.
Selects the default aspect ratio. See detailed descriptions.
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
Set to 0 to disable the Pro:Centric application. Set to 2 for GEM (Java
Sets the level of the TV picture back lighting. See detailed descriptions.
Selects the RF band used by the ATSC tuner. See detailed descriptions.
Set to 1 for Physical Channel tuning. Set to 0 for Virtual Channel tuning.
Selects the Minor Start Channel number. Set to 0 for analog (NTSC) channel.
Set to 0 to use the default aspect ratio each time the TV is turned ON. Set to 1
to retain the aspect ratio set before the TV was turned OFF.
Selects the type of banner to display during channel change.
(Analog channels only) If set to 1, video mutes (blank screen) when no
Set to 1 to restore the factory default settings of all Installer Menu items.
Determines the powered status of the embedded b-LAN module and the GAME
CONTROL/MPI port. See detailed descriptions.
Set to 0 to disable. Set from 1 to 135 to match the RF channel number used
by the Pro:Centric server as its data channel. Set to 255 to use Auto Search
to find the Pro:Centric RF channel. See detailed descriptions.
Sets the Wake For Update hour. See detailed descriptions.
Sets the Wake For Update minute. See detailed descriptions.
Start Channel.
detailed descriptions.
Application) Mode.
signal is present.
206-4340