Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ISLABIKES Icons Janis
Summary of Contents for ISLABIKES Icons Janis
- Page 1 Icons Janis Owner’s manual www.islabikes.co.uk...
- Page 2 Setting up your Icons Janis Step 1 of 6 Remove front wheel and fork packaging 1. Detach cardboard fork box and then remove the axle from the fork by opening the quick release (QR) lever. 2. Remove QR axle from cardboard sleeve.
- Page 3 Secondly, push and pull the wheel from side to side. If there is no movement from either of these actions the wheel is installed correctly. Icons - Janis www.islabikes.co.uk...
-
Page 4: Handlebar Set Up
Tighten max. 30Nm injury or death. If in doubt, please consult our technical support team on +44 (0)800 008 6297 or email techsupport@islabikes.co.uk. Please ensure you identify the left and right pedals before installing. Before riding check front brake operation is correct. To check this, apply both the front and rear brake, they should feel the same. -
Page 5: Adjust Saddle Height
Important: do not lock up the wheels at any point during the bed-in procedure. Allow the brakes to cool prior to any additional riding. If you require further information about your brakes, contact our technical support team on +44 (0)800 008 6297 or email techsupport@islabikes.co.uk. Tighten Loosen seatpost-clamp Move to desired height Tighten clockwise max. - Page 6 You can buy replacement handlebar grips on our website www.islabikes.co.uk or call +44 (0)800 008 6297. Be aware braking performance and grip will be drastically reduced in wet conditions.
-
Page 7: Usage Guidelines
The science of fatigue is not predictable. If in any doubt, please contact our technical support team on +44 (0)800 008 6297 or email techsupport@islabikes.co.uk. Please note your bike is not intended for the following types Or take it to a qualified cycle mechanic for inspection. -
Page 8: Maintenance
+44 Our clearance bikes have the following guarantees, these apply to the original (0)800 008 6297 or email techsupport@islabikes.co.uk. purchaser and are only valid within the UK. Firstly, moving parts on your bicycle will need lubricating from time to... -
Page 9: Disc Brakes
Disc brakes Wheels Rim trueness – Depending on the type of riding you do your Islabikes One of the most important safety features of your Islabike. It is a good habit bikes wheels may become untrue or damaged when riding. This means to check the brakes on a regular basis. -
Page 10: Tyres And Tubes
Your Islabike has had its gears adjusted prior to delivery. These should be re-tighten to close the valve. checked periodically or after a fall to ensure they are operating correctly. Use our guide to inflate your tyres, https://www.islabikes.co.uk/knowledge/ Quick check: technical-support/maintaining-your-islabike/ Ensure your rear derailleur hanger is not twisted or bent. -
Page 11: Recommended Torque Settings
If you can’t find what you are looking for or are unsure of any compatibility for older models, please contact our technical support team by phone or email. techsupport@islabikes.co.uk +44 (0)800 008 6297 For technical support and cycling advise please see the knowledge area of our Frame website. www.islabikes.co.uk/knowledge/ number Icons - Janis www.islabikes.co.uk... - Page 12 Icons - Janis www.islabikes.co.uk...
- Page 13 www.islabikes.co.uk...
Need help?
Do you have a question about the Icons Janis and is the answer not in the manual?
Questions and answers