Page 4
Step 1 of 7 Remove front wheel packaging and unhook the front brake Remove front wheel protection packaging. Remove fork plastic protection packaging. Joni 20/24...
Page 5
Step 1 of 7 Remove front wheel packaging and unhook the front brake Unhook front brake hinge. www.islabikes.co.uk...
Page 6
Hold QR lever in fully ‘open’ Ensure quick release (QR) lever position and turn nut clockwise. is not on gear side. Check this Do not fully tighten nut. matches rear. Ensure QR skewer springs orientation is correct. Correct Incorrect Joni 20/24...
Page 7
– if it is too tight or too loose can adjust by holding lever ‘open’ again and turning nut. Check front wheel is correctly installed by lifting the handlebar and holding the wheel at the fork. Firmly push from side to side. If there is no movement the wheel is fitted correctly. www.islabikes.co.uk...
Page 8
2. Pull the right brake lever on to check brake works correctly. Both brake blocks should contact the rim. Check front brake operates correctly before allowing child to ride. If unsure contact our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk. Joni 20/24...
Tighten both stem bolts clockwise max. 7Nm Failure to correctly tighten stem clamp bolt may result in serious injury or death. If in doubt, please consult our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk. www.islabikes.co.uk...
LH pedal has line marking on axle. If these features are missing, another tip is to check the Islabikes logo. When standing at the back of the bike looking towards the front, the Islabikes text on the pedal should be in the correct orientation to read:...
Page 11
Step 5 of 7 Pedal installation 1. Left pedal 2. Right pedal Left pedal – rotate pedal axle clockwise towards front of bike Right pedal – rotate axle anti-clockwise towards front of bike Tighten max. 30Nm www.islabikes.co.uk...
If you are cycling in any other countries or in the EU, please check national guidelines. It is important that your bike is regularly maintained. It should be inspected if an accident occurs. We do not recommend that any cargo or bicycle trailer is fitted. www.islabikes.co.uk...
Page 14
Never ride a bike with an unplugged handlebar end. You can buy replacement handlebar grips on our website www. islabikes.co.uk or call +44 (0) 1584 708 383. Front brake damage can occur in a crash. If the handlebars become twisted from a crash the cable can wrap itself tightly and damage the noodle hinge dock.
Page 15
User guidelines Your Joni 20/24 has been designed to be ridden on paved and unpaved roads. The maximum safe combined rider and luggage weight limit is 80kg. Nothing lasts forever, including your bike. When the useful life of your bike or its components are over, continued use is hazardous.
Page 16
Take particular care to check the frame tube junctions and welds as well as all the components for damage or excessive wear. If in any doubt, please contact our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk. Or take it to a qualified cycle mechanic for inspection. Joni 20/24...
Page 17
Discontinue use immediately if anything untoward is spotted and contact our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk. www.islabikes.co.uk...
Of course, if you are unsure of anything we strongly recommend you seek professional advice or contact our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk. Firstly, moving parts on your cycle will need lubricating from time to time.
Page 19
We highly recommend this is carried out by a trained cycle mechanic. If in doubt please contact our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk. www.islabikes.co.uk...
Page 20
Wear indicator Rim trueness - Depending on the type of riding you do your Islabikes bikes wheels may become untrue or damaged when riding. This means they will not spin straight and will wobble. If for any reason they are untrue our wheels can be easily repaired, please contact our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk.
Use our guide to inflate your tyres: http://www.islabikes.co.uk/info-hub/how- to-inflate-your-tyres-video. Valve closed Valve open...
Page 22
Look out to see if the rear derailleur is fouling the spokes or looks twisted. If the gears are not working correctly contact our technical support team on +44 (0) 1584 708 383 or email techsupport@islabikes.co.uk. Joni 20/24...
We carry stock of replacement parts for your Islabike including inner tubes, tyres and grips. Please visit our website for a list of readily available spares or contact us on +44 (0) 1584 708 383 or email info@islabikes.co.uk. We only recommend using genuine parts for safety critical components e.g.
Need help?
Do you have a question about the Joni 20 and is the answer not in the manual?
Questions and answers