Dimensional Drawings; Trouble Shooting I Cleaning - MAGMATIC MAGMA PRIME User Manual

DIMENSIONAL DRAWINGS

13.3" / 338mm
6.3" / 160mm
TROUBLE SHOOTING
If you experience low output, pump noise, or no fog output at all, disconnect and discontinue use
immediately. Do not attempt to continue to operate as this may damage the machine. Check the
fluid level, the breaker, and be sure the wall outlet is sending power. If all of the above appears to be
okay, and the unit fails to operate correctly, the unit will require service. Please contact Magmatic
Effects.
CLEANING & MAINTENANCE
When storing your fog machine be sure to store it in a cool area. Cover the machine so that dust
does not build up on the unit. When storing the machine for long periods of time, it is highly advised
to at least run the machine every 3-4 months. Long periods of inactivity can severly shorten the life
of your machine. Only run Atmosity Extreme Filtered Fog Fluid (AEF-4L) through your machine. Never
run plain water, vinegar, or any other liquid solution through your machine. Running anything other
then water based fog juice will severly damage your machine.
15