Download Print this page

Advertisement

Quick Links

Dear Customer:
Thank you for purchasing your equipment from Component Playgrounds. We are proud of our products
and we are confident that you will enjoy your equipment for many years.
NOTE! In order for bolt length guide included on the parts identification page to be correct, you may have
to remove the scaling when printing. To do this, click "print", then under "page scaling" select "none".
Then proceed to print.
Your product is being shipped to you on a common carrier truck line and will be brought directly to your
home. All shipments are delivered to curbside only. The receiver is responsible to unload the
merchandise from the truck and should make arrangements to have someone help unload upon delivery.
Included below are some guidelines that should be followed when receiving your shipment.
1. Confirm that the number of pieces being delivered matches with the number of pieces originally
shipped.
2. Your equipment may arrive on a pallet. If so, please verify with the packing list that all pieces
have arrived. If there are any pieces missing, note this directly on to the delivery receipt
before you sign. Some pieces, such as club house supports, may be shipped separate
from the pallet.
3. Pay careful attention to the condition of the product when it arrives. If there are parts that
have been damaged, note these problems on the delivery receipt before you sign and
accept delivery of the product.
4. Open packaging of slides, glider seats, etc. to inspect for concealed damage.
5. If your shipment appears to have damage and/or missing pieces, a claim must be filed with
the freight company within two business days. Component Playgrounds will assist you
with this process. Contact the Shipping Manager Toll Free @ 877-530-0222 for claims
assistance.
6. Ask your driver to sign or initial the freight slip acknowledging any damage or
discrepancies.
7. Get a copy of the delivery receipt from your delivery driver before he leaves.
All shortages and damaged items are the sole responsibility of the carrier. You are responsible to
notify Component Playgrounds of any shortages or damage relating to your shipment within 2
business days of receipt of your equipment. After this time, any claim for shortage or loss cannot be
honored.
Component Playgrounds cannot be responsible for replacement of any parts missing or damaged
that have not been properly noted on the delivery receipt. Component playgrounds cannot be
responsible for damaged or missing pieces due to the fault of, or loss by the freight company.
We appreciate your business, and look forward to serving you in the future.
Sincerely,
The entire team at Component Playgrounds

Advertisement

loading
Need help?

Need help?

Do you have a question about the CP-AF36-8 and is the answer not in the manual?

Questions and answers

Summary of Contents for Component Playgrounds CP-AF36-8

  • Page 1 Dear Customer: Thank you for purchasing your equipment from Component Playgrounds. We are proud of our products and we are confident that you will enjoy your equipment for many years. NOTE! In order for bolt length guide included on the parts identification page to be correct, you may have to remove the scaling when printing.
  • Page 2: Parts Identification

    Parts Identification CP-AF36-8 Swing Set Description Quantity Box Containing Swing Set Parts ” X 10’ Leg (Five packages of two, equaling 10 legs) ” X 10’ Top rail Triple End with Two Sleeves Commercial Triple End Total Pieces...
  • Page 3: Installation

    Installation Instructions Model CP-AF36-8 Minimum Play Space: 53’ x 32’ 16’ Swinging Clearance 28” 20” 30” 20” 28” 28” 20” 30” 20” 28” 28” 20” 30” 20” 28” 6’ Play 6’ Play Space 32’ Space 16’ Swinging Clearance 53’...
  • Page 4 Installation Instructions Continued… Model CP-AF36-8 #1 Bolting Top Rail Sections Together #2 A-Frame Leg and Third Leg Assembly 3/8” x 2 ¾” Hex bolt with 3/8” Nyloc Nut Triple (1 each per leg) 3/8” x 3/8” Set Screws 3/8” x 3/8” Set Screw...
  • Page 5 Top Rail Assembly Step 1: Slide the Swing Hangers and tighten onto the Top Rail during the Top Rail Assembly process. (Refer to spacing diagram and graphic found above) Step 2: Slide the ends of the 10’ Top Rail as far as it will go, into the larger sleeve of the Triple End.
  • Page 6 1. Slide the drilled end of the legs into the triple end. Find A-Frame Bolt Pack. ” x 2 ” 2. Align the holes in the legs with the holes in the triple end and join together using a ” nyloc nuts. hex bolts and 3.
  • Page 7 Next have three adults stand on opposite ends and in the center to stand the structure up into the place you want it to be installed. Mark holes around a-frame leg, move set to the side of markings and dig holes. Notice! Most of the “A”...
  • Page 8 LINE UP A-FRAME LINE UP A-FRAME LEGS LEGS Place the set into the holes. Align the legs. Level Level...
  • Page 9 All posts and pipe are prepared with enough length to accommodate 12" deep impact attenuating ground cover. Component Playgrounds recommends that 12" of impact attenuating surfacing be placed under and around the playground and any adjacent structures. Playground equipment should not be installed over hard surfaces such as concrete, asphalt or grass.
  • Page 10 • Component Playgrounds recommends that a minimum of 12" of proper impact attenuating surfacing be installed prior to opening the playground for use by children. • Component Playgrounds also recommends that a regular maintenance program be implemented.
  • Page 11 Playgrounds that are designed, installed and properly maintained in accordance with the safety guidelines and standards can still present hazards to children in the absence of adequate adult supervision. Component Playgrounds recommends the following guidelines for supervision of children while the playground is in use.
  • Page 12: Read Before Use

    While every attempt is made by Component Playgrounds to ensure the highest degree of safety in all of our equipment, we cannot guarantee freedom from injury. The user assumes all risk of injury due to use.
  • Page 13 Because the safety of playground equipment and its suitability for use depends on good inspection and proper maintenance, Component Playgrounds recommends that a comprehensive and regularly scheduled maintenance program be implemented and strictly followed. Equipment should be inspected for any potential hazards.
  • Page 14 Maintenance Checklist The following checklist is intended to address general maintenance. This checklist should be used as a springboard to develop a suitable checklist for your specific playground and particular needs. It does not provide a complete safety evaluation. Playgrounds that have been properly engineered and properly installed may still present risks of accident or injury to the children who use the equipment.
  • Page 15 Component Playgrounds or its authorized agent. This warranty also does not cover damage resulting from flood, fire, catastrophe or other acts of nature. To the extent permitted by law, Component Playgrounds shall not be liable for any direct, indirect, special, incidental, or consequential damages.
  • Page 16 Return this form via fax to (801)530-0221, via e-mail to Address:___________________________________________ sales@componentplaygrounds.com, or via U.S. mail to: City: ____________________State:______Zip:_________ Phone: ____________________Fax:___________________ Component Playgrounds Purchase Date: __________Completion Date: ____________ 1630 North Beck Street Salt Lake City, UT 84116 SALES REPRESENTATIVE/DEALER INFORMATION (If different from manufacturer) Today’s Date:_____________________________________...