Download Print this page

Component Playgrounds CP-AR12-8 Installation Instructions Manual

Advertisement

Quick Links

Dear Customer:
Thank you for purchasing your equipment from Component Playgrounds. We are proud of our products
and we are confident that you will enjoy your equipment for many years.
NOTE! In order for bolt length guide included on the parts identification page to be correct, you may have
to remove the scaling when printing. To do this, click "print", then under "page scaling" select "none".
Then proceed to print.
Your product is being shipped to you on a common carrier truck line and will be brought directly to your
home. All shipments are delivered to curbside only. The receiver is responsible to unload the
merchandise from the truck and should make arrangements to have someone help unload upon delivery.
Included below are some guidelines that should be followed when receiving your shipment.
1. Confirm that the number of pieces being delivered matches with the number of pieces originally
shipped.
2. Your equipment may arrive on a pallet. If so, please verify with the packing list that all pieces
have arrived. If there are any pieces missing, note this directly on to the delivery receipt
before you sign. Some pieces, such as club house supports, may be shipped separate
from the pallet.
3. Pay careful attention to the condition of the product when it arrives. If there are parts that
have been damaged, note these problems on the delivery receipt before you sign and
accept delivery of the product.
4. Open packaging of slides, glider seats, etc. to inspect for concealed damage.
5. If your shipment appears to have damage and/or missing pieces, a claim must be filed with
the freight company within two business days. Component Playgrounds will assist you
with this process. Contact the Shipping Manager Toll Free @ 877-530-0222 for claims
assistance.
6. Ask your driver to sign or initial the freight slip acknowledging any damage or
discrepancies.
7. Get a copy of the delivery receipt from your delivery driver before he leaves.
All shortages and damaged items are the sole responsibility of the carrier. You are responsible to
notify Component Playgrounds of any shortages or damage relating to your shipment within 2
business days of receipt of your equipment. After this time, any claim for shortage or loss cannot be
honored.
Component Playgrounds cannot be responsible for replacement of any parts missing or damaged
that have not been properly noted on the delivery receipt. Component playgrounds cannot be
responsible for damaged or missing pieces due to the fault of, or loss by the freight company.
We appreciate your business, and look forward to serving you in the future.
Sincerely,
The entire team at Component Playgrounds

Advertisement

loading
Need help?

Need help?

Do you have a question about the CP-AR12-8 and is the answer not in the manual?

Questions and answers

Summary of Contents for Component Playgrounds CP-AR12-8

  • Page 1 Dear Customer: Thank you for purchasing your equipment from Component Playgrounds. We are proud of our products and we are confident that you will enjoy your equipment for many years. NOTE! In order for bolt length guide included on the parts identification page to be correct, you may have to remove the scaling when printing.
  • Page 2 Parts Identification CP-AR12-8 Swing Set Description Quantity Box Containing Swing Set Parts 4” X 8’6” Legs 3 1/2” X 10’ 4” Top rail Commercial Arch Swing End Total Pieces...
  • Page 3: Installation Instructions

    All posts and pipe are prepared with enough length to accommodate 12" deep impact attenuating ground cover. Component Playgrounds recommends that 12" of impact attenuating surfacing be placed under and around the playground and any adjacent structures. Playground equipment should not be installed over hard surfaces such as concrete, asphalt or grass.
  • Page 4 Slide both ends of Top Rail into 9” Socket of Arch Swing Ends. Insert and tighten 4 set screws at each end. #2 Mark Arch Swing Leg Holes Mark the position of each leg on the ground below the top rail and arches assembled previously #1 Assembling Arch Sections &...
  • Page 5 1. Loosen and remove the top two nyloc jam nuts. 2. Reassemble on to swing top rail with the carriage bolt on top and the nyloc nut on the bottom (Or carriage on bottom and nut on top if it won’t fit the other way. Tighten securely so that the hanger is firmly attached in pace and cannot slide or swivel along top rail.
  • Page 6 Step 5: 4. Slide the smaller end of the legs into the Arch Swing End. Find Arch Swing Bolt pack. 5. Join together using 4 set screws per leg. 6. Tighten all set screws using allen wrench provided.
  • Page 7 Step 6: Next have two adults on opposite ends stand structure up into place. Stand up into holes.
  • Page 8 Step 7: Make adjustments as needed to level out the structure. Level Level Level Level Level Level Level Level Level Level Level...
  • Page 9 • Component Playgrounds recommends that a minimum of 12" of proper impact attenuating surfacing be installed prior to opening the playground for use by children. • Component Playgrounds also recommends that a regular maintenance program be implemented.
  • Page 10 Playgrounds that are designed, installed and properly maintained in accordance with the safety guidelines and standards can still present hazards to children in the absence of adequate adult supervision. Component Playgrounds recommends the following guidelines for supervision of children while the playground is in use.
  • Page 11: Read Before Use

    While every attempt is made by Component Playgrounds to ensure the highest degree of safety in all of our equipment, we cannot guarantee freedom from injury. The user assumes all risk of injury due to use.
  • Page 12 Because the safety of playground equipment and its suitability for use depends on good inspection and proper maintenance, Component Playgrounds recommends that a comprehensive and regularly scheduled maintenance program be implemented and strictly followed. Equipment should be inspected for any potential hazards.
  • Page 13 Maintenance Checklist The following checklist is intended to address general maintenance. This checklist should be used as a springboard to develop a suitable checklist for your specific playground and particular needs. It does not provide a complete safety evaluation. Playgrounds that have been properly engineered and properly installed may still present risks of accident or injury to the children who use the equipment.
  • Page 14 Component Playgrounds or its authorized agent. This warranty also does not cover damage resulting from flood, fire, catastrophe or other acts of nature. To the extent permitted by law, Component Playgrounds shall not be liable for any direct, indirect, special, incidental, or consequential damages.
  • Page 15 Return this form via fax to (801)530-0221, via e-mail to Address:___________________________________________ sales@componentplaygrounds.com, or via U.S. mail to: City: ____________________State:______Zip:_________ Phone: ____________________Fax:___________________ Component Playgrounds Purchase Date: __________Completion Date: ____________ 1630 North Beck Street Salt Lake City, UT 84116 SALES REPRESENTATIVE/DEALER INFORMATION (If different from manufacturer) Today’s Date:_____________________________________...