Advertisement
Quick Links
Required Crew: 2 Required
Concrete: 6-8, 80 lb. bags
Required Tools:
● Wheelbarrow
● Step Ladder (6' or taller)
● Shovel
● Tape Measure
● Digging Bar or Pick
● Level
● Allen Wrench (Provided)
● Open end or Box Wrenches: 9/16", ¾"
● Hammer or Mallet
● Ratchet Handle & Sockets: 9/16", ¾"
● Marker Pen
● Drill: Cordless or electric, or impact driver
Component Playgrounds is concerned about the safety of your vision. It
is important that you choose to protect your vision by wearing proper
safety glasses during each and every phase of this construction
process.
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE BEGINNING
The AF30-10 can be installed as a one day project. The normal time
required to install the AF30-10 is about 2-4 hours for a two man crew. This
time requirement will vary dependent upon the composition of the soil and
the speed of the installers. Mix and pour the concrete as the last step.
*Before digging, please obey local laws by notifying your local
underground utilities marking organization*
Installation Instructions
AF30-10
Advertisement
Related Manuals for Component Playgrounds AF30-10
Summary of Contents for Component Playgrounds AF30-10
- Page 1 The AF30-10 can be installed as a one day project. The normal time required to install the AF30-10 is about 2-4 hours for a two man crew. This time requirement will vary dependent upon the composition of the soil and the speed of the installers.
- Page 3 Top Rail Assembly Step 1 : Slide the ends of the 10’ Top Rail as far as it will go into the Sleeves of the Triple Ends. Step 2 : Insert and tighten (4) 3/8” x 3/8” set screws into each of the Triple End Sleeves using Allen Wrench provided.
- Page 4 Component Playgrounds BRASS BUSHING SWING HANGER 1. Loosen and remove the two nylock jam nuts. 2. Reassemble on to swing top rail. Tighten securely so that the hanger is firmly attached in place and cannot slide or swivel along top rail. 3. Attach carabiner with chain through the ring.
- Page 5 ASSEMBLY 1. Slide the drilled end of the legs into the triple end. Find A-Frame Bolt Pack. 2. Align the holes in the legs with the holes in the triple end and join together using a 3/8” x 2 3⁄4” hex bolts and 3/8” nyloc nuts. Tighten. 3.
- Page 6 Next have two adults stand on opposite ends and stand structure up into the place you want it to be installed. Mark holes around a-frame leg, move set to the side of markings and dig holes. Notice! Most of the “A” frame leg hole needs to be dug towards the inside of the “A” frame leg.
- Page 7 Place the set into the holes. Align the legs. Place a level on the top rail and make the necessary adjustments to get set level.
- Page 8 When you are satisfied that the structure is level, mix and pour the concrete according to the package directions. You will use approximately one and a half to two 80 lb. bags in each leg hole. Concrete will cure faster in warm conditions and slower in cold conditions.
-
Page 9: Read Before Use
Do not attempt to use equipment for something other than the use for which it was designed and intended, or in a manner other than that for which it was designed and intended. While every attempt is made by Component Playgrounds to ensure the highest degree of safety in all of our equipment, we cannot guarantee freedom from injury. The user assumes all risk of injury due to use. - Page 10 We hope that you and your family will enjoy many hours of great family fun while using your Component Playgrounds Products. We appreciate your business. Our goal is to provide safe, durable and fun products using the best materials available. Your product should be mostly maintenance free.
- Page 11 When your equipment is built, Component Playgrounds will repair this damage using a cold galvanizing compound spray along with a top coat of silver aluminum. This is a time tested and durable process. However, when you are...
- Page 12 To Help Prevent Injuries from Falls & Other Hazards 1. Never attach, or allow children to attach the following items to your swing set: Ropes, jump ropes, clotheslines, pet leashes or any similar type of item to your swing set. Any item such as these may present a strangulation hazard.
- Page 13 Limited Lifetime Warranty Component Playgrounds works to build heavy duty products that will stand up to the heavy use of active children. You can trust Component Playgrounds because of the way we design and build our products. We make products that are simple to own, and easy to maintain.
-
Page 14: Warranty Registration Sheet
Return this form via e-mail to: State: Zip: Sales@componentplaygrounds.com Phone: Or via U.S. mail to: Purchase Date: Completion Date: Component Playgrounds 1630 North Beck Street Sales Representative/Dealer Information Salt Lake City, UT 84116 (If different from manufacturer) Organization: Todays Date: City:...
Need help?
Do you have a question about the AF30-10 and is the answer not in the manual?
Questions and answers