IKEA SUPERBT Manual page 10

ENGLISH
M) Free Store mode
After selection of the fridge or
freezer compartment the
animation starts
After selection of the
temperature the animation
flashes for a few minutes.
Switching on
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting" paragraph
(DEMO mode is a function for the
retailer to show the functionality of the
appliance).
The temperature indicators show the set
default temperature.
To select a different set
temperature refer to
"Temperature regulation".
Switching off
Press the ON/OFF symbol for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from the
power socket.
Switching off the fridge
To switch off the fridge press the fridge
compartment button for few seconds.
The fridge OFF indicator is shown.
Switching on the fridge
To switch on the fridge press the fridge
compartment button.
The fridge OFF indicator goes off.
N) Demo mode
To select a different set
temperature refer to
"Temperature regulation".
Bar indicators
The bars guide the user when interacting
with the unit and indicate at what level the
unit is performing. The bars indicate:
• which compartment is in focus (active),
when animation stops
• the desired temperature on the scale
• whether the set temperature is higher or
lower than the previous one (increasing
or decreasing animation).
Temperature regulation
1. Select the fridge or freezer
compartment.
2. Press the temperature button to set the
temperature.
3. Set default temperature: +4°C for the
fridge and -18°C for the freezer.
The set temperature will be reached
within 24 hours.
The temperature indicators show the set
temperature.
After power failure the set
temperature remains stored.
Free Store mode
This function allows rapid cooling of foods
and more uniform temperature in the
compartment.
To switch on the function:
1. Select the fridge compartment
2. Press the Mode button until the
corresponding icon appears.
To switch off the function:
1. Press the Mode button in order to select
an other function or press the Mode
10