Table of Contents
Advertisement
Options
Setting "Start at"
With the
Start at
function, you set the
exact time at which you want the pro-
gram to start.
Set the hours with the sensor
buttons.
Touch the minute number block.
Use the sensor buttons to enter
the minutes and confirm your entry
with OK.
The saved start time for the selected
program will appear in the display for
several minutes.
Close the door.
When the set time is reached, the pro-
gram selected will begin automatically.
60
Setting "Finish at"
Use the
Finish at
function to set the lat-
est time by which the program selected
has to be finished.
Set the hours with the sensor
buttons.
Touch the minute number block.
Use the sensor buttons to enter
the minutes and confirm your entry
with OK.
The estimated start time for the se-
lected program will appear in the dis-
play for several minutes.
A message will appear in the display if
the program cannot be completed by
the set finish time because it has too
long a cycle time.
If it appears, confirm the message
with OK.
Close the door.
The program will start automatically
when the estimated start time is
reached.
Advertisement
Table of Contents
