Table of Contents
Advertisement
Display functions
The display is used to select or set the
following:
- the program
- The options
- the Timer
- the
Settings
The display can show the following:
- the program name
- the program stage
- The estimated time left for the pro-
gram to run
- Any relevant fault messages and in-
formation
To save energy, the dishwasher turns
off after a few minutes if you do not
press any sensor buttons during this
time.
Touch the sensor button to turn the
dishwasher back on.
Guide to the appliance
The sensor button on the control field
and in the display react to fingertip con-
tact.
The touch display can be scratched
by pointed or sharp objects, e.g.,
pens.
Only touch the display with your fin-
gers.
Touch the required menu option to se-
lect it.
The currently selected setting is marked
in orange and can be changed.
The OK sensor button in the display is
used to confirm a message or setting
and to move to another menu level.
To exit a sub-menu again, use the Back
sensor button.
Touch the Home sensor button at any
time to return to the Programs menu.
If you do not press any sensor buttons
for several seconds, the display will re-
vert to the previous menu. You will then
have to enter your settings again.
19
Advertisement
Table of Contents
