TP-Link TL-MR100 User Manual page 70

FAQ
Q1 How do I restore my router to its factory default settings?
With the router powered on, press and hold the WPS/RESET button on the rear panel
until the Power LED starts flashing.
Note:
Once the router is reset, the current configuration settings will be lost and you will need to re-configure the router.
Q2 What should I do if I forget my password?
• Web Management Page Password:
Restore the router to its factory default settings and then create a new password using
1-32 characters.
• Wireless Network Password:
1 The default Wireless Password/PIN is printed on the product label of the router.
2 If the default wireless password has been changed, log in to the router's web
management page and go to
Q3 What should I do if I cannot access the web management page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer has connected to the router correctly and the corresponding
LED light up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure you enter the correct IP address to log in: http://tplinkmodem.net.
• Check your computer's settings:
1 ) Go to Start
status and tasks.
2 ) Click Internet Options
Basic
Obtain DNS server address
> Control Panel >
on the bottom left.
> Wireless to retrieve or reset your password.
automatically.
Network and Internet, and click
Obtain an IP address
View network
66