TP-Link TL-MR100 User Manual page 53

Chapter 10
4 When the WPS LED is on, the client device has successfully connected to the router.
Method 2 Enter the client device's PIN on the router
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced
3 Select Method Two--PIN
4 Enter the client device's PIN in the field, then click Connect.
5 Connect successfully
device has successfully connected to the router.
Method 3 Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced
3 Take a note of the Current PIN of the router. You can also click the
to get a new PIN.
4 On the client device, enter the router's PIN. (The default PIN is also labeled on the
bottom of the router.)
> Wireless > WPS page.
and select Client's PIN
will appear on the above screen, which means the client
> Wireless > WPS page.
Specify Your Network Settings
radio button.
Generate button
49