Samsung HG43RU710N Install Manual page 32

Admin menu Item
Factory Lock
Password Popup
Password Input
Security
Password Setting
Password Reset
Security Mode
USB
HDMI
DRM DRM Mode
Self Diagnosis for HTV
System
Self Diagnosis
for TV
Description
Disable entry to Admin menu.
• ON: The password is needed before entering Admin menu.
• OFF: Disable this function.
Enable or disable password input popup window. If this option is set to off, the TV will
not display the password input popup window when entering the Admin menu. If set
to ON, the password input popup window appears.
If this function is enabled, the password input popup window appears which asks for
an 8-character security password. The admin must enter a password before applying
or updating security preferences. After the correct password is entered, options such
as Password Setting, Password Reset and Security Mode are available.
User can change the password.
Password is reset to "00000000."
Provides password protected administrative fucntionality to enable or disable
features of hospitality TV, such as USB, HDMI. To use this option, Security Mode set
to ON. After Security Mode set to ON, options such as USB, HDMI are automatically
enabled. Clone USB to TV and TV Reset will be disabled in the Admin menu.
Enable or disable USB access. If this function is set to Disable, access to USB media is
blocked.
Enable or disable HDMI access. If this function is set to Disable, Anynet+, HDMI
source, HDMI type external channels will not be accessible to the user.
Configures DRM support.
• OFF: Turns off DRM support.
• LYNK DRM: Select to turn on LYNK CAS support only.
• STB SI Vendor Setting
– Lets you check the communication with the SI STB or SBB. If you have any
problems with the communications with the SI STB or SBB, use this diagnosis
function. If your broadcasting system does not have a problem, contact a
Samsung service center. If STB SI Vendor Setting appears to have failed and
communication with the SI STB or SBB has failed, first check your SI STB or SBB.
If your SI STB or SBB does not have a problem, contact to a Samsung service
center.
Run the Self Diagnosis menu.
• Start Picture Test: Use this test when you experience a problem with your TV's
picture.
• Start Sound Test: Use this test when you experience a problem with your TV's
sound.
• Signal Information: Show digital broadcasting signal information.
• Start Smart Hub Connection Test: If the TV has trouble with network connection
or TV services, check the Smart Hub connection status.
• Reset Smart Hub: Reset the Smart Hub and Samsung account settings stored on
your TV.
• Reset: Restore all TV settings, excluding network settings, to the factory defaults.
English - 32