Related Manuals for Samsung HG49RU750AJ
Summary of Contents for Samsung HG49RU750AJ
- Page 1 INSTALL GUIDE HG43RU750AJ HG49RU750AJ HG55RU750AJ HG65RU750AJ HG75RU750AJ Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com Model Serial No.
-
Page 2: Before Reading This Install Guide
Before Reading This Install Guide This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. Figures and illustrations in this Install Guide are provided for reference only and may differ from the actual product appearance. -
Page 3: Warning! Important Safety Instructions
Warning! Important Safety Instructions Please read the Safety Instructions before using your TV. Refer to the table below for an explanation of symbols which may be on your Samsung product. Class II product: This symbol indicates that a CAUTION safety connection to electrical earth (ground) is not required. - Page 4 • Be sure to contact an authorised Samsung service centre for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc.
-
Page 5: Table Of Contents
Contents Before Reading This Install Guide ---------------------------------------------------------------------------- Warning! Important Safety Instructions ---------------------------------------------------------------------------- What's in the Box? Installing the LED TV Stand ---------------------------------------------------------------------------- Installing the wall mount kit ---------------------------------------------------------------------------- Securing the TV to the Wall ---------------------------------------------------------------------------- Wall Mount Kit Specifications (VESA) ---------------------------------------------------------------------------- Providing proper ventilation for your TV ----------------------------------------------------------------------------... - Page 6 Setting the Admin Menu Admin menu items ---------------------------------------------------------------------------- USB Cloning ---------------------------------------------------------------------------- Settings Cloned in the Admin menu ---------------------------------------------------------------------------- Setting Auto Initialize ---------------------------------------------------------------------------- Updating the TV’s Software ---------------------------------------------------------------------------- Editing Channels Using Channel Editor ---------------------------------------------------------------------------- Specifications and Other Information Specifications ---------------------------------------------------------------------------- Environmental Considerations ---------------------------------------------------------------------------- Decreasing power consumption ----------------------------------------------------------------------------...
-
Page 7: What's In The Box
01 What's in the Box? Make sure the following items are included with your TV. If any items are missing, contact your dealer. Warranty Card / Quick Setup Remote Control & Batteries Power Cord Guide / Regulatory Guide (Not Wall Mount Adaptor (AAA x 2) available in some locations) Data Cable... -
Page 8: Installing The Led Tv Stand
Installing the LED TV Stand Assembling the Stand and Components When installing the stand, use the provided components and parts. x 4 (M4 x L14) Stand Screws • Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the table surface. - Page 9 (M4 x L14) (M4 x L14) 43″ 49″- 75″ NOTE • Make sure to distinguish between the front and back of each component when assembling them. • Make sure that at least two persons lift and move the TV. English - 9...
-
Page 10: Installing The Wall Mount Kit
To Prevent the TV from Falling • TV Holder Kits are sold separately. To purchase a TV Holder Kit, contact a Samsung service centre. 1. Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws are firmly fixed to the wall. -
Page 11: Wall Mount Kit Specifications (Vesa)
Samsung is not liable for these kinds of accidents. – Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. -
Page 12: Providing Proper Ventilation For Your Tv
• When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the product falling. -
Page 13: The Remote Control
02 The Remote Control About the Buttons on the Remote Control • The images, buttons, and functions of the remote control may differ depending on the model. • The remote control has Braille points on the Power, Channel, Volume, and Select buttons and can be used by visually impaired persons. -
Page 14: Installing Batteries Into The Remote Control (Battery Size: Aaa)
Installing batteries into the remote control (Battery size: AAA) Match the polarities of the batteries to the symbols on the battery compartment. • The colour and shape of the remote may vary depending on the model. • Use the remote control within 7 m of the TV. •... -
Page 15: Controlling External Devices With A Remote Control - Using The Universal Remote
Select your TV service provider so that you can control your cable or satellite box with your Samsung remote. Search for your service provider 4. Select the HDMI port on the TV to which the set-top box is Select TV Input Source connected. - Page 16 New Setup • This function may not be supported depending on the model or geographical area. • You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's remote control without any additional setup. • Specific external devices connected to the TV may not support the universal remote feature.
-
Page 17: Downloading The Universal Remote Icon
Downloading the Universal Remote icon 1. Store the following files in the root directory of your USB device: File name File type File Size App tile stb_app_icon Jpg, png 245 x 135, 2MB Source icon stb_source_icon Jpg, png 135 x 135, 2MB stb_source_icon.jpg Sources Remote Access... -
Page 18: Initial Setup
04 Initial Setup When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on the screen and configure the TV's basic settings to suit your viewing environment. If you already completed the Initial Setup, run the Initial Setup again using the following menu. O Admin menu >... - Page 19 Select your TV source • Select the type of broadcast signals the TV receives. Then, channel scanning starts. • After channel scanning is completed, select Next or press the right directional button on the remote control. • When the RF cable is not connected, this step is skipped. Setting the current time •...
-
Page 20: Using The Tv Controller
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its usage, refer to the figure below. • The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please remove the protective film. -
Page 21: The Connection Panel
05 The Connection Panel TV Rear Panel ➄ ➅ ➆ • When connecting an external device, match the colour of the connection port to the cable. • Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ①... - Page 22 – It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version, contact to a Samsung service centre. ④...
-
Page 23: Connections
The LAN Port on the Wall LAN Cable (Not Supplied) • This TV supports the IEEE 802.11 a /b /g /n /ac communication protocols. Samsung recommends using IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly. - Page 24 • Authentication Modes: WEP, WPAPSK, WPA2PSK • Encryption Types: WEP, TKIP, AES In compliance with the Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802.11n mode. If the wireless access point supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button Configuration) or a PIN (Personal Identification Number).
-
Page 25: Connecting The Tv To A Sbb Or Stb
Connecting the TV to a SBB or STB TV Rear Panel STB (SBB) ETH MODEM Data Cable Connect the DATA port of the TV to the ETH MODEM port of the STB (SBB) with the Data cable. • The ETH MODEM port name that you connect the Data Cable to may differ depending on the SBB or STB type. •... - Page 26 STB (SBB) side Confirm the code on the Code Label. Cable code Pin assign SI Vendor TV Rear Panel STB (SBB) SIDE 1: IR BN39-02462A SAMSUNG and 1: NC GREEN 2: GND 2: RX 3: NC WHITE 3: TX (Colour: BLACK)
-
Page 27: Setting The Admin Menu
• Cloud Solution, HMS, Virtual Standby, Room Number and its submenus. Menu items in the Interactive mode only: • SI Vendor: Samsung and other vendors. All other items appear in both modes. After a menu appears, follow these general directions to navigate and change values: •... -
Page 28: Admin Menu Items
• Interactive: TV works with an SI STB or SBB. • Standalone: TV works alone, without an SI STB or SBB. • Interactive: Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / SI Vendor Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo •... - Page 29 Admin menu Item Description Gives you direct, immediate access to some of the channel menu functions on the Channel Setup Broadcasting menu such as Auto Tuning, Audio Options, etc. Lets you edit the channels stored in the TV's memory. • Change the channel numbers and names, manage genre and language groups and delete channels.
- Page 30 Admin menu Item Description Picture Menu Lock Enable or disable the Picture menu. • ON: The main menu is displayed. Menu Display • OFF: The main menu is not displayed. • OFF: Broadcasting menu is disable for guest. Channel Menu Display Menu OSD •...
- Page 31 Samsung service centre. If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to a Samsung service centre.
- Page 32 SW Update Lets you upgrade the TV Software with a USB device. System Display the web site of related Samsung service centre, and product and software About This TV information. When the TV is in standby mode, you can configure the settings of the power indicator.
-
Page 33: Usb Cloning
USB Cloning O Admin menu > Cloning The USB cloning function lets you download user-configured settings (Picture, Sound, Broadcasting, Admin menu and so on) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard file of settings and distribute that standard file to all the TVs in your facility. -
Page 34: Settings Cloned In The Admin Menu
Hospitality Mode Standalone / Interactive Interactive mode : Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / Quadriga / ETV / IBahn / Magilink / SI Vendor Otrum / Siemens / Amino / MDC / Enseo... - Page 35 Menu Item Sub Item Cloned or not Clone TV to USB ― Cloning Clone USB to TV ― Setting Auto Initialize ON / OFF Network Setup ― Download by App ID ― Apps Editable ON / OFF Smart Service Terms & Policy ―...
-
Page 36: Setting Auto Initialize
Setting Auto Initialize O Admin menu > Cloning > Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Broadcasting, Admin menu and so on. This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. - Page 37 Menu Item R-Gain G-Gain B-Gain 2 Point R-Offset G-Offset White Balance B-Offset 20 Point Interval 20 Point Settings Green Picture Expert Settings Blue Gamma ST.2084 BT.1886 RGB Only Mode Colour Space Colour Colour Space Settings Green Blue Sound Output Sound Mode Balance Equaliser Sound...
- Page 38 Menu Item Clock Mode Time Zone Time Clock System Manager Language Anynet+ (HDMI-CEC) Game Mode Input Signal Plus External Device Manager HDMI Black Level General Keyboard Language Input Device Manager Keyboard Settings Keyboard type Energy Saving Mode Eco Solution Motion Lighting Auto Power Off High Contrast Greyscale...
-
Page 39: Updating The Tv's Software
Updating the TV’s Software DO NOT turn off the TV’s power until the update is complete. The TV will turn off and on automatically after completing the software update. Video and audio settings will be reset to their defaults after a software update. We recommend you clone the TV's settings so that you can easily reset them after the upgrade. -
Page 40: Editing Channels
08 Editing Channels Using Channel Editor O Admin menu > Channel > Channel Editor Using Channel Editor you can edit the channels stored in the TV's memory. • Change the channel numbers and names, edit the channel language and channel genre and delete channels. •... - Page 41 Editing the Channel Number Change the channel number of a channel you select. To change a channel number, follow these steps: 1. Select a channel on the Channel Edit screen. 2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select button.
- Page 42 Assigning the Channel Number to the external device The external device source of the TV are displayed in the last page of the Channel Editor menu as shown below. > 1. Select a external device source on the Channel Edit screen. 2.
-
Page 43: Specifications And Other Information
09 Specifications and Other Information Specifications Model Name HG43RU750AJ HG49RU750AJ Display Resolution 3840 x 2160 3840 x 2160 Screen Size 43 inches 49 inches Measured Diagonally Sound (Output) 20 W 20 W Dimensions (W x H x D) Body 970.2 x 563.2 x 58.2 mm 1102.8 x 637.8 x 59.1 mm... -
Page 44: Environmental Considerations
Model Name HG75RU750AJ Display Resolution 3840 x 2160 Screen Size 75 inches Measured Diagonally Sound (Output) 20 W Dimensions (W x H x D) Body 1684.6 x 966.4 x 60.1 mm With stand 1684.6 x 1056.5 x 356.1 mm Weight Without Stand 37.0 kg With Stand... -
Page 45: Supported Resolutions For Uhd Input Signals
Supported Resolutions for UHD Input Signals • Resolution: 3840 x 2160p, 4096 x 2160p If Input Signal Plus is set to Off Colour Depth / Frame rate (fps) RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0 Chroma Sampling 50 / 60 8 bit If Input Signal Plus is set to On Colour Depth /... - Page 46 Display Horizontal Vertical frequency Clock frequency Polarity (horizontal Mode Resolution format frequency (KHz) (Hz) (MHz) / vertical) 2560 x 1440 60 Hz 88.787 59.951 241.500 + / - VESA CVT 2560 x 1440 120 Hz 192.996 119.998 497.750 + / - *1920 x 1080 100 Hz 112.500...
-
Page 47: Supported Resolutions For Video Signals
Supported Resolutions for Video Signals Check the resolutions supported for video signals. Display Horizontal Vertical frequency Clock frequency Polarity (horizontal Mode Resolution format frequency (KHz) (Hz) (MHz) / vertical) 720 (1440) x 576i 50 Hz 15.625 50.000 27.000 - / - 720 (1440) x 480i 60 Hz 15.734... -
Page 48: Dimensions
Dimensions Front view / Side view The displayed image may differ from your TV, depending on the model. • 43˝ (Unit: mm) 58.2 970.2 943.2 531.4 563.2 636.3 210.3 • 49˝ (Unit: mm) 59.1 1102.8 1075.8 606.0 637.8 716.4 216.3 English - 48... - Page 49 • 55˝ (Unit: mm) 58.7 1238.6 1211.6 682.4 714.2 792.8 261.3 • 65˝ (Unit: mm) 59.1 1457.5 1430.5 805.5 837.3 917.3 312.8 English - 49...
- Page 50 • 75˝ (Unit: mm) 60.1 1684.6 1652.2 930.3 966.4 1056.5 356.1 English - 50...
- Page 51 Port panel detail / Rear view Detailed dimensions can be checked at Displaysolutions.samsung.com. Base Stand detail The displayed image may differ from your TV, depending on the model. • 43˝ (Unit: mm) 34.3 210.3 168.1 • 49˝-55˝ (Unit: mm) 42.8 261.3...
- Page 52 • 65˝ (Unit: mm) 47.2 312.8 199.2 • 75˝ (Unit: mm) 53.8 356.1 214.5 English - 52...
-
Page 53: Licences
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Open Source License Notice Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English. English - 53... - Page 54 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the Samsung service centre. Country/Area Web Site Samsung Service Centre www.samsung.com/hk/support (Chinese) HONG KONG 3698 4698 www.samsung.com/hk_en/support (English) 0800 333 www.samsung.com/hk/support (Chinese) MACAU 1800 7267864 | 1800-SAMSUNG www.samsung.com/hk_en/support (English)