Samsung HG43RU710N Install Manual page 20

Enter Your Zip code
8
Enter your location to quickly find your service providers and set up your TV.
– This step is not available depending on the geographical regions.
Select your TV source
• Select the type of broadcast signals the TV receives. Then, channel scanning starts.
9
• After channel scanning is completed, select Next or press the right directional button on the remote control.
• When the RF cable is not connected, this step is skipped.
Setting the current time
• Select your time zone on the map that appears.
• Set DST (Daylight Saving Time) to No, Yes or Auto to apply to the TV.
10
• If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the
Clock Mode to Auto. The TV will set the date and time automatically.
• If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and time
on the TV manually.
TV setup summary
11
Displays the information set on the TV.
Setup complete
• Select apps to add to Home Screen, and then try using your remote control and see if it works.
12
• Select the Start Watching TV button to complete the Initial Setup. Then Admin menu appears. Press Power button to
exit.
• If you enter the zip code in step 8, step 10 is skipped.
English - 20