Samsung HG43RU710N Install Manual page 23

④
ANT IN
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system
⑤
COMPONENT IN / AV IN
– Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as
VCRs.
– Connect audio cables to R-AUDIO-L on your TV and the other ends to corresponding audio out ports on AV
(Composite) devices.
– Connect component video cables (not supplied) to the component ports (PR, PB, Y) on your TV and the other
ends to corresponding component video out ports on a DVD player. Match the colors on the ports and cables.
– If you want to connect both a set-top box and a DVD player, you should connect the set-top box to the DVD and
connect the DVD to the component ports (PR, PB, Y) on your TV.
– The PR, PB and Y ports on your component devices (DVD) are sometimes labeled R-Y, B-Y and Y or Cr, Cb and
Y.
– For AV (Composite), connect RCA audio cables (not supplied) to R-AUDIO-L on your TV set and the other ends
to corresponding audio out ports on an external device.
– When your are connecting a AV (Composite) device to AV IN [Y/Video], connect the video cable (yellow) to the
AV IN [Y/VIDEO] port (green/yellow).
⑥
DATA
– Used to support data communication between the TV and the SBB or STB.
– Connects using phone-jack type plugs.
– For more information about the data cables, refer to page 27.
⑦
LAN
Connect to a wired LAN using CAT 7 (*STP type) cable.
* Shielded Twisted Pair
English - 23