Parts And Functions - Panasonic WV-X1551LN Basic Information

Parts and functions

 Cables
{1} RJ45 Network cable
{1} RJ45 Network cable
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the network connector.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
• When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
{5} EXT I/O cable
{6} MONITOR OUT terminal
(factory shipment: NTSC monitor)
cable
Ethernet
(category 5e or better, straight,
4 pairs (8 pins))
{5} 4P alarm cable (accessory)
2P power cable (accessory)
{2}
Power supply cable
{2}
{3}
{4} Audio output cable (black)
9
12 V DC (red)
GND (black)
Audio input cable (white)