Parts And Functions - Panasonic WV-S4176 Basic Information

Parts and functions

„ Terminals
【5】
Audio cable connector
{1} RJ45 Network terminal
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the network terminal.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply,
12 V DC will be used for power supply.
• When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
{2} Power supply terminal (12 V DC)
Connect the output cable of the AC adaptor to the power supply terminal (accessory) and attach it
to the camera.
IMPORTANT:
• Be sure to use the power cable plug (accessory) provided with this product.
• Be sure to fully insert the power cable plug (accessory) into the power supply terminal (12 V
DC). Otherwise, it may damage the camera or cause malfunction.
• When installing the camera, make sure that excessive force is not applied to the power cable.
• Be sure to use an AC adaptor compliant with the Specifications (written in the indication label
on the bottom side of this unit) regarding power source and power consumption.
{1} RJ45 Network terminal
{2} Power supply terminal (12 V DC)
{3} Audio input cable (white)
{4} Audio output cable (black)
{5} EXT I/O terminals/ EXT I/O terminal plug
【1】
【2】
8
Audio cable (accessory)
【3】
【4】