Advertisement
Precautions for use
When the product is accessible from the
Internet
To prevent unauthorized access, note the
following.
• Leave user authentication turned on.
• Periodically change passwords that are used
to access the product.
Refer to the Operating Instructions for
information about how to change passwords.
To keep on using with stable performance
Do not use this product in hot and humid
conditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. Do not expose this
product to direct heat sources such as a heater.
Usage such as switching the power ON/OFF
frequently could lead to failure of the camera.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble.
Do not subject front cover to strong impact.
Doing so may cause damage or immersion.
Do not touch the front panel and lens surface
directly with your bare hands.
A dirty front panel or lens causes deterioration of
picture quality.
When an error is detected, this product will
restart automatically.
This product will be inoperable for around
2 minutes after the restart just as when the power
is turned on.
About the automatic status detection
function
When this product malfunctions due to
exogenous noise, etc. for 30 seconds or more,
the product will automatically restart and will return
to normal state. When the product is restart,
initialization will be carried out as when the power
of the product is turned on. When the product
repeatedly resets, exogenous noise level around
the product may be high and that may cause
malfunction. Contact your dealer for instructions.
Periodically images on the screen appear to
be distorted
When the camera is installed in a location where
it is subject to small vibrations (for example, when
it is installed near devices that vibrate), images
may appear distorted and stretched lengthways.
This phenomenon is a characteristic of image
pickup devices that use CMOS sensors and is
caused by the relationship between the periodic
movements of the camera and the timing that the
image sensor reads images. This is not a problem
with the camera. To reduce the possibility of this
phenomenon occurring, install the camera in a
secure location.
About the dehumidifying device
• This product has dehumidifying device
to keep the inside at low moisture level,
preventing condensation and quickly
dissipating dew if produced.
• Dew may be produced depending on the
conditions of temperature, humidity, winds,
and rain, and it may take time to dehumidify.
• Do not cover the surface of the dehumidifying
device.
6
Dehumidifying device
Advertisement
