Access Control - TP-Link TL-WR844N User Manual

Chapter 5
5 7 2

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Select the access mode to either block (recommended) or allow the device(s) in the
list.
To block specific device(s):
1 ) Select Blacklist
2 ) Click Add and select devices you want to be blocked. You can see the devices
have been added to the blacklist.
To allow specific device(s):
1 ) Select Whitelist
Security > Access Control:
and click SAVE.
and click SAVE.
Configure the Router in WISP Mode
95