TP-Link TL-WR844N User Manual page 114

Chapter 5
• To set System Time:
1. Select the way in which the router gets its time:
Device, Manually.
2. Select your local Time
3. Enter the address or domain of the
4. Click SAVE.
• To set up Daylight Saving Time:
1. Select Enable Daylight Saving
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click SAVE.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
Zone.
NTP Server 1
Time.
Configure the Router in WISP Mode
Get from Internet, Get from Managing
or NTP Server 2.
Start fields.
End fields.
109