Table of Contents
Advertisement
Chapter 5
•
Default Gateway
Dynamic IP as the internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
•
Primary & Secondary DNS
server.
•
LAN
- This field displays the current settings of the LAN, and you can configure them
on the
Advanced
>
•
MAC Address
•
IP Address
- The LAN IP address of the router.
•
Subnet Mask
•
DHCP Server
- This field displays the current settings of DHCP (Dynamic Host
Configuration Protocol) Server, and you can configure them on the
Server
page.
•
DHCP Server
enabled by default and the router acts as a DHCP server.
•
IP Address Pool
addresses.
•
Dynamic DNS
- This field displays the current settings of the Dynamic DNS (Domain
Name System), and you can configure them on the
DNS
page.
•
Service Provider
•
Host Name
- The Domain Name you have entered in the
•
Status
- The status of the Dynamic DNS service connection.
5 2 2
Internet
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced
>
3. Set up the internet connection and click SAVE.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click
RENEW
to renew the IP parameters from your ISP.
Click
RELEASE
to release the IP parameters.
- The Gateway currently used is shown here. When you use
- The IP addresses of DNS (Domain Name System)
Network
>
LAN
page.
- The physical address of the router.
- The subnet mask associated with the LAN IP address.
- Indicates whether the DHCP server is enabled of disabled. It is
- The IP address range for the DHCP server to assign IP
- The Dynamic DNS service provider you have signed up for.
Network
> Internet.
Configure the Router in WISP Mode
Renew
or
Release
Network
Advanced
>
Network
Dynamic DNS
Dynamic
IP, and the router will
here to
>
DHCP
>
Dynamic
page.
67
Hide quick links:
Advertisement
Table of Contents
