PNOZ X7
Service life graph
The service life graphs indicate the number of cycles from which failures due to wear must
be expected. The wear is mainly caused by the electrical load; the mechanical load is negli-
gible.
Example
Inductive load: 0.2 A
}
Utilisation category: AC15
}
Contact service life: 4 000 000 cycles
}
Provided the application to be implemented requires fewer than 4 000 000 cycles, the PFH
value (see Technical details) can be used in the calculation.
To increase the service life, sufficient spark suppression must be provided on all output
contacts. With capacitive loads, any power surges that occur must be noted. With DC con-
tactors, use flywheel diodes for spark suppression.
Order reference
Product type
PNOZ X7
PNOZ X7
PNOZ X7
PNOZ X7
PNOZ X7
PNOZ X7
PNOZ X7
PNOZ X7
Operating Manual PNOZ X7
19692-EN-06
Switching current (A)
Features
42 VAC
48 V AC
110 V AC
115 V AC
120 V AC
230 V AC
240 VAC
24 VAC/DC
Connection type
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Order no.
774 058
774 049
774 053
774 054
774 055
774 056
774 057
774 059
27