VTech VSP736 Configuration Manual page 5

Creating extension
Registering phone
UAD Settings
UAD settings
Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
UAD settings
Navigate to Settings:UAD.
Make sure VTech UAD is enabled. To check the UAD status click on the edit icon
corresponding to your VTech phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.
The standard options window will be shown below.
Select VTech phone model from the UAD select box.
Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions
registered from remote networks, WAN, Internet etc.