Configure Blf; Etension Settings - VTech VSP736 Configuration Manual

Hide thumbs Also See for VSP736:
Table of Contents

Advertisement

Example for Hostname: tftp://voip.bicomsystems.com
Example for IP Address: tftp://192.168.1.10
Click on Save button.
Click on Reboot link in the left hand navigation menu.
Click on Reboot button.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.

Configure BLF

This chapter describes how to configure BLF (Busy Lamp Field) for VTech VSP736.
The following topics are covered:
- Extension Settings
- Phone Settings

Etension Settings

Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login page. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
Edit extension.
On the Extensions page click on the edit icon corresponding to your extension.
Click on Advanced Options button.
Navigate down to the Auto Provisioning and Presence group of settings.
Make sure Auto Provisioning is set to Yes.
Make sure Presence is set to "Yes".
Click on the Save button to save changes.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VSP736 and is the answer not in the manual?

Table of Contents