Related Manuals for Sauder WoodTrac closets 359540
Summary of Contents for Sauder WoodTrac closets 359540
- Page 1 Shelves NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Call us at 1-855-854-7465 or vist us at www.woodtrac.com Lot #: 359540 02 / 17 / 14 Purchased: ____________________...
-
Page 2: Part Identification
PART IDENTIFICATION: While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this PART IDENTIFICATION to help identify similar parts. SHELF MOLDING ADJUSTABLE SHELF METAL PIN - 12... - Page 3 (12 used in this step) Assemble your SHELF on a carpeted fl oor or on the empty carton to avoid scratching the SHELF or the fl oor. With hammer, tap four SHELF SNAPS (6R) into a SHELF (L). Repeat this step for the remaining SHELVES (L). 416687 www.woodtrac.com Page 3...
- Page 4 BROWN 1" FLAT HEAD SCREW (6 used in this step) Unfi nished surface The SHELF MOLDINGS (A) are optional. To fastened a SHELF MOLDING (A), you must fi rst drill through the pre-drilled holes in a SHELF (L) with a 1/4" drill bit. Fasten a SHELF MOLDING (L) to a SHELF (A).
- Page 5 45 lbs. 45 lbs. 45 lbs. (12 used) Insert four METAL PINS (1R) for each SHELF into the hole locations of your choice in the ENDS of a #416647 Chassis. Now, set the ADJUSTABLE SHELF (L) onto the METAL PINS so the SHELF SNAPS are resting on the METAL PINS. Push on the SHELF until each METAL PIN “snaps”...
- Page 6 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Loose or unstable closet components. •...
- Page 7 BY LAW. contact WoodTrac® at 1-855-854-7465, 502 Middle Street, Archbold, OH (USA) 43502, woodtrac@sauder.com. Return of any defective Product may be required Exclusions from Coverage: This limited warranty does not cover defects arising by WoodTrac®, or we may elect to examine the product at its location. If we ask from (1) the improper installation or use of the Products;...
- Page 8 Certifi cate of Conformity 1. This certifi cate applies to the Sauder Woodworking Product identifi ed by this Instruction Book. 2. This certifi cate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).