Honda DREAM YUGA Owner's Manual page 75

POSITION LIGHT BULB
1. Remove the front cowl (1) by removing
the screws (5 nos.) (2).
2. Disconnect the connector (3).
3. Pull out the position light bulb (4) out of
the head light unit and remove the bulb
from its holder.
4. Install a new bulb in the reverse order
of removal.
(2)
(1)
(1) Front cowl ¼Ýa V dkmy½
(2) Screws ¼LØw l ½
(3) Connector ¼duDs V j½
Position light bulb
(4)
Honda Motorcycle & Scooter India Pvt. Ltd.
(3)
(4)
¼iks f t"ku ykbV cYc½
HEADLIGHT BULB
1. Remove the front cowl (page 67).
2. Disconnect the connector.
3. Remove the dust cover (5).
4. Remove the bulb (6) while pressing
down the locking pin (7).
5. Install a new bulb in the reverse order
of removal.
6. Install the dust cover with its "TOP"
mark (8) facing up.
(8)
(6)
(7)
(5) Dust cover ¼MLV doj½
(6) Bulb
¼cYc½
(7) Locking pin
¼ykW f da x fiu½
(8) "Top" mark ¼*VkW i * ekdZ ½
(5)
67