Miele DA 6698 W Operating And Installation Instructions page 35

Hide thumbs Also See for DA 6698 W:
Table of Contents

Advertisement

Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
- cleaning agents containing descaling
agents,
- powder cleaners or cream cleaners,
- aggressive all-purpose cleaning
agents or spray cleaners for grease,
- oven sprays.
Cleaning the grease filters in the
dishwasher
 Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
 Use a standard household
dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the detergent used,
cleaning the filters in the dishwasher
may cause the inside filter surfaces to
become discoloured. This will not
affect the functioning of the grease
filters in any way.
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
refitting them.
Cleaning and care
 When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Replace the grease filters, making
sure that the locking clips are facing
down towards the cooktop.
 If a grease filter is inadvertently
refitted upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
 With the fan is switched on, press the
grease filter control  for approx. 3
seconds, until only 1 is flashing.
The grease filter symbol  goes out.
If the grease filters are cleaned before
the operating hours counter has
reached its maximum:
 Touch the grease filter control  for
approx. 6 seconds, until only 1 is
flashing.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents