Epson ST-C8000 Instructions
Hide thumbs Also See for ST-C8000:

Advertisement

Quick Links

ST-C8000/ST-C8090
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
product near water.
®
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
1

Unpack

Do not open the ink bottles until you are ready to fill the ink
Note:
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
When using telephone equipment, you
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
The printer ships with the transportation lock in the
Caution:
printing position. Do not move it from the printing position.
3
Lower the scanner unit.
2

Fill ink tanks

Keep the ink bottles out of the reach of children and do not
Warning:
drink the ink.
This product requires careful handling of ink. If ink spills,
Caution:
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
• The included ink bottles are designed for reliable printer setup and
cannot be resold.
Epson recommends the use of Genuine Epson 542 pigment
inks. The use of any other inks may cause damage not covered
by the warranty, particularly if they are not pigment. Epson
cannot guarantee that non-Epson 542 inks are pigment, even if
labeled as compatible.
1
Open the ink tank cover, then open the cap for the
black ink tank.
Refer to the color-coded sticker on the ink tank unit to
Note:
identify the color of each tank.
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Do not shake or squeeze the ink bottles. Do not touch
Caution:
the top of the ink bottle after its cap is removed.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ST-C8000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Epson ST-C8000

  • Page 1 If ink gets on your clothes or belongings, it may not come off. Note: • Epson cannot guarantee the quality or reliability of third-party ink. • Use the ink bottles included with the printer to set up the product. • The included ink bottles are designed for reliable printer setup and cannot be resold.
  • Page 2 Insert the ink bottle into the filling port. Raise the control panel, then press the power button to turn on the product. Do not force the bottles into position; they are keyed for Note: each color. If an error message appears, turn off the product and Note: check that no protective material has been left inside the product and that the transportation lock is in the printing position.
  • Page 3 See www.epson.com/voice (U.S.) or www.epson.ca/voice Install software (Canada) for more information. * May require the Epson Print Enabler or Mopria Print Service app from Google Play™. Note: • An Internet connection is required to obtain the product software.
  • Page 4 Android, Chromebook, and Google Play are trademarks of Google LLC. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.

This manual is also suitable for:

St-c8090Workforce st-c8000Workforce st-c8090

Table of Contents