Table of Contents
Advertisement
I
NSTALLATION
The instructions below will take you through the process required to install the
transmitter and receiver.
Choosing a Location for Transmitter and Receiver
The range of the radio transmission depends on several factors. Try to position
the transmitter and the receiver as close as possible for best results.
Typical maximum ranges:
Line of Sight: 400 feet (120 m)
Through Walls and Ceilings: 100 to 200 feet (30 to 60 m)
Through Trees and Foliage: 100 to 200 feet (30 to 60 m)
As you position your console, be aware of possible interference from cordless
phones and other items. To prevent interference, maintain a distance of 10 feet
between the console and the cordless phone (handset and base). Also, for best
reception, avoid positioning the console near large metallic surfaces (e.g., most
refrigerator surfaces).
Installing Transmitter and Receiver
Install the transmitter in an attic or garage, or in one of Davis's weatherproof
shelters.
1. Remove the cables from your existing junction box.
We recommend that you label the end of each cable as you disconnect it.
This will help you identify the cables when attaching them to the transmit-
ter.
Page 4
SensorLink™
Advertisement
Table of Contents
