Cancelling an emergency call
If you have triggered an emergency call by mistake, you can cancel it.
¤
Briefly press the End call key
Setting up emergency call
In order to be able to use the function you must
•
save the emergency numbers and
•
activate the emergency function.
The police, ambulance service or fire service must not be used for an emergency call.
Storing emergency numbers
¤
Press the display key SOS . . . The message No SOS No. available is displayed. After a short
time, the display is opened for entry of SOS number 1.
or
¤
. . . use
number (SOS 1-SOS 4)
¤
. . . use
to enter the first name and/or last name and the number for the emergency
call
. . . use
matically activated
If your telephone is connected to a PABX, you must enter the access code (outside line
code) as the first digit of your entry, if necessary (
You should carry out a test run to ensure that the emergency function has been
correctly set up.
Activating/deactivating the emergency call function
Activate with the SOS display key
The function is deactivated. At least one SOS number has been entered.
¤
Press the display key SOS
Enabling/disabling from a menu
¤
. . . use
to select
Emergency Call
SOS
Edit
to toggle between the entry fields
enter more emergency numbers if required
Activation: Edit (
to select
Emergency Call
SOS
OK
use
to select the emergency
Save . . . the emergency call is auto-
user guide of your PABX).
= activated)
OK
Activation: Edit (
Emergency call
= activated)
41