Table of Contents
Advertisement
Attaching the door
Reattach the oven door in the reverse sequence to
removal.
When attaching the oven door, ensure that both
1.
hinges are inserted straight into the opening
(figure A).
The notch on the hinge must engage on both sides
2.
(figure B).
Fold back both locking
3.
levers (figure C). Close the oven door.
:
Warning – Risk of injury!
Risk of injury. If the oven door falls out accidentally or a
hinge snaps shut, do not reach into the hinge. Call the
aftersales service.
Additional door safety
When preparing meals with long cooking times, the
oven door can reach very high temperatures.
Supervise small children and keep them away from the
oven when the oven is in operation.
Additional safety devices have been fitted to prevent
contact with the oven door. Always attach these safety
devices when children could come near the oven.
You can purchase this optional accessory (11023590)
from the after-sales service.
3Trouble shooting
I f a fault occurs, there is often a simple explanation.
T r o u b l e s h o o t i n g
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Fault table
If a dish does not turn out as well as you had hoped,
refer to the chapter:
Tested for you in our cooking studio.
contains useful tips and information on cooking, baking
and roasting.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
Fault
Possible cause
The oven does
Faulty circuit
not work.
breaker
Power cut.
Oven not hot.
Dust on the con-
tacts.
The burner does
Power cut or
not ignite.
damp ignition
plugs.
The gas grill does
The protecting
not work.
plate is incor-
rectly inserted.
Trouble shooting
en
It
Troubleshooting/information
Look in the fuse box and check
that the circuit breaker is in
working order.
Check whether the kitchen light
or other kitchen appliances are
working.
Turn the control knobs clock-
wise and anti-clockwise a few
times.
Light the gas burner with a gas
lighter or a match.
Make sure that the protecting
plate is correctly inserted.
Remove the protecting plate
and reinsert it.
23
Advertisement
Table of Contents
