Table of Contents
Advertisement
Operating the appliance
en
Example
Melting
Warming
Heating and keeping
warm
Steaming*
Braising*
Boiling*
Frying
*
If you are using a saucepan with a lid, turn the flame down as soon as the food starts to boil.
**
Optional. Available for some appliances. Depending on the appliance model. (For frying on the wok burner,
we recommend that you use a wok.)
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Setting the oven's lower gas burner
When the lower gas burner is lit, you can start to bake
on a baking tray when the oven door is closed.
Preheat the empty oven for 15 minutes and start
baking.
Example in diagram: Baking at 170 °C.
Open the top cover, if available. Keep the top cover
1.
open for as long as the appliance is in operation.
Turn on the main gas supply to the appliance. Insert
2.
the plug into the socket. Open the oven door.
Push in the function selector and turn it anti-
3.
clockwise to 170 °C.
Keep the function selector pressed in and press the
4.
ignition button
at the same time.
8
Use the igniter to ignite the gas that escapes from the
lower oven gas burner.
Keep the function selector pushed in for 10 seconds so
that the safety pilot starts up.
18
Food
Chocolate, butter,
margarine
Stock, tinned vegetables
Soups
Fish
Potatoes and
miscellaneous vegetables,
meat
Rice, vegetables, meat
dishes (with sauces)
Pancakes, potatoes,
schnitzel, fish fingers
Hotplate
Economy burner
Standard-output burner
Economy burner
Standard-output burner
Standard-output burner
Standard-output burner
High-output burner**
Wok burner**
Check through the opening in the oven's bottom
5.
panel that the flame is burning. If the flame goes out
again, repeat the process from step 3.
Close the oven door carefully.
6.
Once the food is cooked, switch off the function
7.
selector.
You can use the relevant selector to change the heating
function and temperature at any time.
Do not press the selector for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one minute.
Cooking mode
Small flame
Small flame
Small flame
Between large and small flame
Between large and small flame
Large flame
Between large and small flame
Advertisement
Table of Contents
