Davis Instruments Leaf Wetness Sensor Connection Manual page 2

2. To prevent fraying or cutting of cables,
secure them so they will not whip about in
the wind. Secure a cable to a metal pole by
wrapping electrical tape around them both.
Make sure cables are secure by placing
clips or ties approximately every 3 – 5' (1 –
1.6 m)
Note: Do not use metal staples or a staple gun to secure cables. Metal staples —
especially when installed with a staple gun — have a tendency to cut the cables.
Contacting Davis Technical Support
If you have questions about your leaf wetness sensor, or encounter problems
installing or operating the station, please contact Davis Technical Support.
Note: Please do not return items to the factory for repair without prior authorization.
(510) 732-7814 – Monday – Friday, 7:00 a.m. – 5:30 p.m. Pacific Time.
support@davisnet.com – E-mail to Technical Support.
(510) 732-9229 – For callers outside the USA or Canada.
(510) 670-0589 – Fax.
www.davisnet.com – Copies of User Manuals are available on the "Support"
page. Watch for FAQs and other updates. Subscribe to the e-newsletter.
info@davisnet.com – General e-mail.
Product Number: 6420
Davis Instruments Part Number: 7395.110A
Leaf Wetness Sensor
Rev A Manual (8 May 2002)
This product complies with the essential protection requirements of the EC EMC Directive 89/336/EC.
The term "IC:" before the radio certification number only signifies that Industry of Canada technical
specifications were met.
Copyright © 2002 Davis Instruments Corp. All rights reserved.
3465 Diablo Avenue, Hayward, CA 94545-2778
510-732-9229 • Fax: 510-732-9188
E-mail: info@davisnet.com • www.davisnet.com
Cable Clip
Securing Cables with Clips and Ties
Cable Tie