Sensors; Unbalanced Load Detection System; Cleaning And Maintenance; Appliance Housing/Control Panel - Bosch WNA144L9SN Instruction Manual And Installation Instructions

Sensors

en
4: Switching the drum care
■
information signal on/off.
on
Ž
Πoff
Exiting setting mode
You can now end the process and set
the programme selector to the Av (Off)
position. The settings are saved.
H
Sensors
U nbalanced load detection
S e n s o r s
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Place large and small items of
Note:
laundry evenly in the drum.
40
2
Cleaning and
maintenance
:
Warning
C l e a n i n g a n d m a i n t e n a n c e
Risk of death!
There is a risk of electric shock if touch
live components.
Turn the programme selector to
Av (Off). Pull out the mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
Appliance housing/control
panel
Remove the detergent residue
■
immediately.
Wipe the housing and the control
■
panel with a soft, damp cloth.
Do not use abrasive cloths, sponges
■
or detergents (stainless steel
cleaner).
Do not clean the appliance with a
■
water jet.