Sony XAV-AX5500 Operating Instructions Manual page 7

 Sound select keys
Changes the sound.
  (standby)
Turns the unit in standby mode (USB charging is
still available). To resume, press any buttons.

(monitor off)
Turns off the monitor. When the monitor is
turned off, touch any part of the display to turn it
back on.

(EXTRA BASS)
Changes the EXTRA BASS setting.

(EQ10/subwoofer)
Changes the EQ10/subwoofer setting.
Basic Operations
Switching the FM/AM Tuning
Step
Set the FM/AM tuning step of your country.
1
Press HOME, touch [Settings]  [General] 
[Tuning Steps], then set the FM/AM tuning
step.
2
To exit the setup menu, touch
three times.
Pairing with a BLUETOOTH Device
When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings] 
[Bluetooth]  [Bluetooth Connection]  [ON]
 [Pairing].
flashes while the unit is in pairing standby
mode.
2
Perform pairing on the BLUETOOTH device
so it detects this unit.
3
Select your model name shown on the
display of the BLUETOOTH device*.
When pairing is made,
* If passkey input is required on the BLUETOOTH device,
input [0000].
Connecting Rear View Camera
By connecting the optional rear view camera to the
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
"Connection/Installation" (page 12).
To display the picture from the rear view
camera
Press HOME, then touch [Rear Camera].
(back)
stays lit.
7
GB