Hussmann MicroSC ISMGG2DA-A Installation & Operation Manual page 8

1-4 INSTALLATION
2. Use a cordless screwdriver to remove the
screws attached at the sides, front and rear of
the crate.
3. Remove the protector plastic bag, which
is covering the case. Carefully remove the
strapping wrapped around the case. Remove
white protectors around the case (10 pieces).
P/N 3110586_A
4. Remove the frontal screws from the skid-
crate brackets. (4 brackets total).
Frontal
Screws
5. Identify the taller case. Remove the case
from the skid with a fork lift. Set the forks
below the taller case base, between rail base
and wood skid. Maximum fork opening is
29 ½ inches in order to avoid damaging the
casters.
U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com
Brackets
Taller
Case
Direction
Forklift