Table of Contents
Advertisement
Example for IP Address: 192.168.1.10/prov
Enter Auto Provisioning username and password into User Name and Password fields.
If you choose to use server type TFTP enter Hostname or IP Address
Example for Hostname: voip.bicomsystems.com
Example for IP Address: 192.168.1.10
Click on SaveSet button.
Click on Autoprovision Now button.
You'll have to wait couple of seconds for the configuration to be updated.
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Configure BLF
This chapter describes how to configure BLF (Busy Lamp Field) for Htek UC912P.
The following topics are covered:
- Extension Settings
- Phone Settings
Etension Settings
Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
NOTE:
Do not power
Advertisement
Table of Contents
Need help?
Do you have a question about the UC912P and is the answer not in the manual?